	LIVE CHAT WITH A SPECIALIST NOW! Get live support from a recovery expert

800.970.7188Toll FREE 24/7 Call Now! Getting started

You are here: Resources & Tools

How-to Guides

Logical Recovery Steps

SELECT A COUNTRY

United States

CUSTOMER PORTAL TRACK AND MANAGE

Case progress status and details online 24/7

PARTNER SERVICE CENTER

Online partner account management portal

Beginners Guides & Steps To Basic Logical Data Recovery - SalvageData

Steps to recovery

The number one rule to follow when you have lost data is to not write anything more to the affected hard drive! This rule stands true for any situation...

If you have deleted a partition by accident, do not create another partition, just leave it blank.

If you have deleted files from the recycling bin that you realize you need, do not (if possible) save anything to the drive. The reason for this is that hard drives do not actually erase anything, not data or partitions. When you erase a file from the operating system, it is just marked on the drive as having been deleted. When the system needs to store more data on the drive, it will consider files on the drive marked 'deleted' as being empty space, and cheerfully copy over them. If that happens then you're in big trouble.

The same rule applies twice over for partitions; since partition information just presents the operating system with a way of addressing the space available on the drive. If you wipe out a partition everything from it will seem to be gone.

So if there is no partition information, no data can be read by the operating system. This does not mean that your data it is not there however, only that you can't see it. Data-recovery programs have no such handicap.

What I had done in my zeal was to allow FDISK to test the integrity of the drive, which it does by writing a pattern of data to certain areas. Of course, in my case, many of these areas contained partition information and/or critical system files. The result was one missing partition, due to a destroyed boot sector, and one unbootable (but still readable) XP installation. The good news? I got it (almost) all back.

Here's how.

The first, and best thing to do in a data-loss situation is to make sure no more data is written to the drive. Obviously, if you have just the one partition and it's fried, you can't boot normally to the operating system. The best option in this situation is to transfer the drive to another computer, preferably one using the same file-system as your damaged partition (i.e. the same operating system, or a newer version). See the PCSTATS Guides section for information on how to move your hard drive to another computer.

Transferring the HDD to another computer has the dual benefit of preventing the drive from being written to accidentally, and potentially allowing you to retrieve information from the disk just by using Windows Explorer to look through file structures.

If you have damaged or erased essential operating system files, but the partition information is still intact Windows will not boot. The HDD can still be read from a different operating system which is one way out of the doom and gloom.

This was the case with one of the two XP partitions on the disk I mangled, as I was able to fully access it after moving the hard disk physically to another computer.

Beginners Guides

Steps to recovery

Article describes steps that must be done to recover lost data.

Read Document >

Principle of data recovery

Article explains what are principles of data recovery.

Read Document >

Primary Partition Gone?

Article shows what should be done when primary partition is gone because of various reasons.

Read Document >

RAID

Article explains what is RAID.