|
Data Recovery Services and Software for Technical Specification NAS 2000 by SalvageData |
Technical Specification
RAID Architecture
|
|
64-bit RISC 100MHz or 400Mhz CPU with 100MHz memory bus
800/1600 Mbytes/sec internal bandwidth
NAS Engine can be attached to any JetStor storage array
|
|
Host Bus Interface
|
|
Dual 320 MB/sec.LVD (Low Voltage Differential) SCSI
or
Dual 2Gbit LC Fiber Channel optical
|
|
Disk Bus Interface
|
|
Mirrored hot-swap ATA drives for JetNAS OS
|
|
Command Queuing
|
|
253 commands (host SCSI or FC channels)
|
|
Cache
|
|
Up to 4096 MB NAS Engine
Up to 1024 MB RAID Subsystem
|
|
Network Interface
|
|
Dual 1000 Base-T Gigabit Ethernet copper
Optional 10/100 Base-T Ethernet
|
|
Network Protocols Supported
|
|
Windows: CIFS/SMB (TCP/IP), WINS, DHCP
UNIX: NFS, TCP, ARP, RARP, DHCP, FTP, BOOTP, Telnet
Macintosh: AFP, AFP over TCP/IP
Novell: TCP/IP, Bindery |
|
Temperature
|
|
50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
|
|
Relative Humidity
|
|
10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
|
|
Certifications
|
|
FCC, CE, TUV, and UL/CSA
|
|
Size/Weight
|
|
19" wide, 20.5" deep, 3.5" (2U) high, 40 lb. / 20 kg.
|
|
I/O Connectors
|
|
NAS Engine: Dual RJ-45 Network port; Single or dual 68-pin LVD SCSI port(s)
RAID Subsystem: Four standard 68-pin SCSI, two 9-pin DB9 type RS-232 serial terminal port and fax / pager port
|
|
Power Required
|
|
110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz. autosensing |
|
